1979-04 MUSTANG STRANGE ENGINEERING FRONT COIL OVER KIT - 12" 200LB

Better Weight Transfer Adjustable Ride Height Saves Weight 12" 200 Lb Spring Rate Epoxy Powder Coated Springs (2) 12" 200Lbs Springs (2) Front Coil Over Kits Made in the USA Mustang 12" 200 Lb Spring Rate Coil Over Kit Save weight on the front and achieve better 60' times with your 1979-2004 Mustang with the Strange Engineering coil over set up. The 12" 200 Lb Knight springs included with this kit are cold-wound and feature a black epoxy powder coat finish for a durable finish. The coil over kit is made up of a threaded aluminum coil-over sleeve, (2) spring seats, jam nut, locking nut, thrust bearing and races. The threaded coil over sleeve allows you to dial in the height of the ride for optimal weight transfer. Technical Notes - Aftermarket caster/camber plates are necessary to use this kit. - 2 1/2" inside diameter of springs - 2.22" outside diameter of sleeve - Spring seat adjuster wrench not included - May have clearance issues when used with 9" wide front wheels - Designed for Strange, KYB, Lakewood, Koni, Tokico, and Competition Engineering Struts - DOES NOT fit Bilstein Struts - This kit services the front suspension only. Application -Fits 1979-2004 Mustang V8 Installation Note - Installation of front coilovers on 1994-2004 Mustangs, as well as 79-93 Mustangs w/ 94-04 front control arms, may require clearancing of a flange near the driver's side frame rail. The flange is on the oval-shaped hole on the inboard face of the driver's side upper frame rail. - Wheel spacers may be required to clear front strut assembly if running a wide wheel/tire combination. Installation Note The use of anti-seize on the threaded collars is REQUIRED for smooth operation of adjustment nuts