MUSTANG STRANGE AXLE, SPOOL, & C-CLIP ELIMINATOR KIT - 5-LUG - 35 SPLINE | 86-93

Significantly Stronger Than Stock Induction Hardened Axles Eliminates C-Clips Uninterrupted Power Transfer NHRA Legal Made In USA 5-Lug 35 Spline Axles 1550 Premium Forged Alloy Steel 8.10lb 35 Spline Spool C-Clip Eliminators w/ Timken Bearings 3" Studs (2) 35 Spline Axles (2) C-Clip Eliminators (1) 35 Spline Spool (10) 3" Wheel Studs All Installation Hardware Made in the USA PRODUCT DESCRIPTION Strange Axle & C-Clip Eliminator Kit Drastically improve performance at the drag strip with this 1986-1993 Mustang Strange 8.8" axle, spool, and c-clip eliminator kit! The factory axles are weak and can't hold up to the abuse of drag racing. These Strange alloy axles are induction hardened to create an axle that is much stronger than the factory axles. Strange CNC machines these axles using a modified 1550 premium forged alloy steel in a 35 spline count that withstands an even higher torque and bending load over it's 28 and 31 spline counterparts. Stronger, 3" wheel studs are included to reduce the risk of stud failure as well as provide enough thread for wheel spacers. This kit includes 5-Lug, 35 spline axles, 35 spline spool, and c-clip eliminators. Strange Steel Spool This kit replaces your factory differential with an 8.10lb 35 spline spool. This saves a significant amount of weight while increasing strength due to the simplistic design. Both axles will turn at the same speed with an equal amount of uninterrupted force, making it a great choice for drag racing. Because of this it is highly recommended you DO NOT drive it on the street. C-Clip Eliminators Strange C-Clip eliminators are included to keep your Mustang within the rules of drag racing. By eliminating the factory c-clips, your axles mount to the end of the axle housing. If your axle breaks, the entire axle and wheel assembly will stay put instead of rolling down the track. These high-quality C-Clip eliminators feature Timken roller bearings that are ideal for constant strip use. Wheel Stud Note Strange includes 1/2" diameter 3" long screw-in studs with this kit. Open-ended lug nuts should be utilized if a wheel spacer is not being used. Application Fits 1986-1993 Mustang w/ 8.8" rear axle